Radiation & Ozone Resistant Golden Yellow Class H 6051 Polyimide Film for Medical Device Manufacturing for Electrical Equipment Insulation

Product Description

Technical Parameter List

Serial Number	Parameter Name	Enter the value
1	Product Model	6051
2	Brand	Zhonghao
3	Material	Polyimide (PI) Film
4	Thickness	12.5μm, 25μm, 40μm, 50μm, 75μm, 100μm, 125μm
5	Width	500mm, 1000mm
6	Color	Amber-yellow transparent film
7	Thermal Class	Class H, 180°C
8	Continuous Working Temp	-269°C ~ +240°C
9	Tensile Strength (MD)	≥135 MPa
10	Dielectric Strength	≥180 kV/mm (25μm, average)
11	Volume Resistivity	≥1×10¹³ Ω·m (20°C)
12	Flammability	UL94 V-0
13	Density	1.42 ± 0.03 g/cm³
14	Application	Motor, Transformer, Coil insulation, Mica tape substrate, NHN/NMN composite base film
15	Certification	RoHS

Electrical Properties

Number	Parameter	Unit	Requirement
1	Dielectric Strength — 25 μm	kV/mm	≥180 (average)
2	Dielectric Strength — 50 μm	kV/mm	≥160 (average)
3	Dielectric Strength — 75 μm	kV/mm	≥145 (average)
4	Volume Resistivity (20°C)	Ω·m	≥1×10¹²
5	Volume Resistivity (200°C)	Ω·m	Min 1.0E+10
6	Surface Resistivity (200°C)	Ω·m	≥1×10¹³
7	Relative Permittivity (50 Hz)	—	3.5 ± 0.4
8	Dissipation Factor (50 Hz)	—	Max 4.0E-3

Product Description

INTRODUCE

The Polyimide tape is used Polyimide film as carrier and coated with silicone adhesive single side. With excellent Acid resistance, anti-solvent, anti-radiation and easy peel off. Widely used in printed circuit board (PCB), SMT tin stove, Lithium battery,electronics industry transformers, motors, coils, capacitors and variable frequency power supply etc...

Mechanical Properties
Serial Number	Parameter	Unit	Minimum Requirement	Typical Value
1	Tensile Strength (MD — Machine Direction)	MPa	≥135	150 ~ 180
2	Tensile Strength (TD — Transverse Direction)	MPa	≥115	130 ~ 160
3	Elongation at Break (MD / TD)	%	≥35	40 ~ 70
4	Modulus of Elasticity	GPa	2.3 ~ 2.8	2.5
5	Thermal Shrinkage (150°C, 30 min)	%	≤1.0	0.2 ~ 0.6
6	Thermal Shrinkage (400°C, 30 min)	%	≤3.0	1.0 ~ 2.2

FEATURES

Good Quality polyamide PI Film sheet die cut for All Thickness And Market kapton  polyimide film  is an Electrical insulation material with outstanding thermal, mechanical, chemical and electrical properties. 3M has been used successfully in field applications where the environmental temperatures were as low as -269°C and as high as 400°C. It can be easily fabricated by a wide variety of techniques, including die cutting, punching and thermoforming.It is available in 5 different thicknesses from 23 micron to 125 micron and in several different grades type HN being the most popular.HN film can be laminated, metallized, punched, formed or adhesive coated.
It is highly recommended for applications requiring an all-polyimide film with an excellent balance of properties over a wide range of temperatures.